|
|
Wastewater Treatment Equipment
Industrial wastewater treatment removes contaminants from industrial process waters, or effluent. These contaminants include oils, dissolved heavy metals, suspended solids and organic compounds.
Vibratory Wastewater Treatment
Fully-Automatic & Semi-Automatic Centrifuges
Process water recycling systems can be connected to virtually any mass finishing machine. This increases the savings potential of mass finishing. Most mass finishing processes such as de-burring, precision grinding, rough grinding, radiussing or polishing are wet processes. Water and cleaning agents (compounds) are the carriers for resultant removal of media and metal fines.
The resultant process water is completely recycled via a closed-loop system. Water and compound savings contribute to significant cost reductions. The system technology is based on special centrifugal technology with an acceleration factor of up to 2000 g, coupled with environmentally-friendly chemistry developed in-house.
Process-water circulation systems can be adapted to any mass finishing application. Semi- and fully-automatic centrifugal systems are available.
Industrial Wastewater Treatment
The Flocculent System Process
Stage One:
The RT Unit is filled with effluent. The turbine mixer is started and DH Reactant is added. After five (5) minutes of mixing a large floc will form. The mixer is then stopped and settling of the floc to the bottom of the tank occurs, usually in a couple of minutes.
Stage 1
Stage Two:
Once the settling, or phasing, of the floc has occurred, draining and filtering begins. Clarified water from the upper area of the tank is drained first, followed by the floc (sludge). Filter media captures the solids, allowing the clarified water through to a clean compartment. A discharge pump automatically transfers the fluids to sewer or recycling vessel.
Stage 2
Stage Three:
An automated conveyor advances the filter media and sludge as needed. This usually requires only five (5) feet of filter media. An included self-tipping sludge gondola captures the filter media and sludge for disposal. The sludge dries to cake, without need of a filter press. The process is now complete. The water will pas local discharge limits, and the sludge will pass TCLP.
Stage 3
Free Sample Processing
Contact us about getting a free sample processing to insure you install the right equipment for your application.
For questions or to order call: (716) 288-7105